4 in 1 Charge Cradle for Wii Remote Controller
Functions
1. It can charge four remotes with battery packs simultaneously.
2. Four charge cradles have functions of charging and power instructions respectively.
3. It is powered up by Wii console without need of any additional power. And it can remove trouble of not charging the battery when the console is off.
4. Four charge cradles control independently and do not affect one another.
5. The CPU can adjust the charging current automatically according to battery's attribute, the maximum charging current amounts to 400MA.
6. It has protection functions of over-voltage, over-current, over-charge, over-discharge and short-circuited for positive and negative ones.
7. It can identify non-rechargeable batteries automatically (including alkaline batteries) so as to avoid any burst danger due to misplacement.
8. Constant voltage charging mode + PWM (Pulse Width Modulation) + trickle (30MA) mode.
9. It can be used as storage case for remotes, and can be charged automatically when it is not full and will power off when fully charged.
10. It has a calculator inside, and will be powered off automatically when the charging time is over 6 hours so as to prevent non-charging and constant charging when the battery goes bad.
Specifications
1. Input voltage: DC12V
2. Input current: MAX700ma
3. Single charging current: AX380MA
4. Dimensions: 100*46MM
5. Weight: 100g
6. Cable length: 1.2MM
7. Attachment: 700mAh battery pack |
|
|
|
|
