Wireless outdoor CPE/AP
CPE is a wireless signal receiver wifi wireless terminal access device that can replace the wireless card, wireless AP and Wireless Bridge! It can receive the wireless router, wireless AP and wireless print server wireless signal! It is a new type of wireless terminal access equipment! Widely used in hospitals, units, factories, residential and other wireless network access, saving the cost of laying cable network!
It can cover 1km~5km!!!
Specifications:
Chipset: Ralink 3050 300MHz
12dBi Directional antenna
16MB SDRAM 4MB Flash
802.11N 150Mbps
POE support
Features:
Our CPE has been proven in extreme temperature and weather conditions. Additionally, it has advanced ESD/EMP immunity design to protect against common outdoor radio and ethernet failures and eliminate truck-rolls for carriers.
•Size:275*80*55mm
•Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45)
Ethernet Interface
•Approvals: FCC Part 15.247, IC RS210
RoHS Compliance: YES
•Antenna: Integrated antenna array + External RP-SMA
•Power Supply: 12V, 1A (12 Watts). Supply and injector included
•Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)
•Operating Temperature: -20C to +70C (System PCB optimized for hi-temp)
•Weight: 0.4 kg
•Operates on 2.4 GHz frequency band including 11n mode 1T1R technology for enhanced throughput up to 150Mbps.
•Backward compatible with legacy IEEE 802.11g, 802.11n (2.4GHz) standards
•High power with integrated 14dBi antenna for extended coverage.
•Supports Gateway, Bridge, WISP mode for wireless networks.
•Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x)
•Support NAT, SPI (Stateful Packet Inspection) for advanced firewall features
•Compliant with IEEE 802.3 and IEEE 802.3u 10/100 Mbps
•Supports WMM function to meet the multimedia data bandwidth requirement
|
|
|
|
| Select Image |
 |
|
|
|
|
